I have 3 cams, 2 of which work fine both in live view and playback. The 3rd only loads up to a percentage and then comes up with error code 260015, which after some googling is listed as a time out error.
I'm reluctant to do an off and on again on the recording box in case I make things worse, or should I just try this. Anyone have the same issue
Great hardware, rubbish software since the last update
Cheers
I'm reluctant to do an off and on again on the recording box in case I make things worse, or should I just try this. Anyone have the same issue
Great hardware, rubbish software since the last update
Cheers